INON INC. releases an ultimate LED light 「LE250」 which is equipped with 5W high intensity power LED producing 250 lumen
from its high quality aluminum alloy compact body.


・LE250
　--To be released Spring 2009

・W50° Filter・LE
　--To be released Spring 2009

・Single Light Holder ・LE
　--To be released Spring 2009

・Double Light Holder・LE
　--To be released Spring 2009

・Quad Light Holder・LE
　--To be released Spring 2009

・Z Joint
　--available in the market



【「LE250」】



●Main features●

■Compact body and powerful 250 lumen
The INON 「LE250」 carries Cree 5W power LED producing 250 lumen in its compact body (195.5mm(L) × 33.7mm (dia.))
As a photographic equipment manufacture, we stick on light color and successfully produce color temperature around 6,000K
which is close to natural light avoiding bluish influence like conventional white LED light but supporting to create vivid underwater world with natural color.


■Fly-eye filter efficiently diffusing light
The 「LE250」 comes with a hollow diffusing filter made from two laminated high transmittance optical grade acrylic fly-eye lenses.
This fly-eye lens filter has extraordinary coverage with less light attenuation comparing to a translucent diffusing filter.
Also a red filter is supplied for the mode of life observation. This red filter helps not giving stress to shy creatures.

・「W40° Filter・LE」・・・・Supplied with the LE250 to increase beam angle to 40°
・「W50° Filter・LE」・・・・Optional product to increase beam angle to 50°.


■Flexible beam angle selection
A light with an ordinary reflector has less light intensity on main area due to light diffusion.
The LE250 is an ideal diving light with unique collimator system made from effective combination of total reflective acrylic material
without intensity loss and collective lens providing even and constant 20° beam angle.
With the supplied W40° Filter, the LE250 works as close range modeling light producing rimless natural wide beam.
You can freely control light depending on various situations.


■Wide range optional accessories. Powerful 『Quad Holder・LE』
The INON LE250 is not simple handy light but has wide range of optional accessories as photographic equipment.
Especially different type holders 『Single』『Double』and capacious『Quad』 support photography and videography.
4 x LE250s on the quad holder not only provides four times intensity but supports new photographic expression
to flexibly configure condensed/diffused light source by using/not using diffusing filters.


■High quality corrosion resistant aluminum alloy body
The LE250 body is made from aluminum alloy carrying seawater-resistant characteristic providing high durability and high quality.
The LE250 is dual use LED light on land/underwater and ensures to benefit you in every fields.


■Reasonable 3 x AA size battery operation
The LE250 runs by easily obtainable 3 x AA batteries.
Particularly next generation NiMH battery “eneloop”(HR-3UTG) has less self-discharging and repeatedly rechargeable characteristic
enabling you to continuously use the LE250 for 135 minutes with practicable intensity.
No problem even for night diving.


■Double O-ring, depth rating 120m
Double O-ring structure on battery retaining part and switch part
uses well-established oil-bearing O-rings prevents accidental flooding and acquires 120m depth rating(※).
The switch is rear rotate style with anti-rotation stopper. Simple yet reliable switch construction
supports reliable ON/OFF operation and the stopper prevents accidental flooding caused by over loosening.
（※）Depth rating 120m. INON has confirmed operation check at 78m depth during use test.



Refer to following leaflet for product images and specifications.

・Ultimate underwater light 「LE250」(PDF:189KB)
　http://www.inon.co.jp/e_pdf/LE250_En.pdf



April 20th, 2009

INON Inc.