We are pleased to announce new accessories for Olympus digital camera system 『E-440 (EVOLT E-440)』(*1) /「PT-E03」(*1) to use compatible Inon strobe.


・「Optical D Cable L・Cap W38 Set with Shade Rubber Sheet」
　--Release date: July 12th, 2007

・「Holder II Set」
　【Set consists of 『Holder II』 and 『Main Base II』】
　--available in the market

・「Holder II・Grip Set」
　【Set consists of 『Holder II』, 『Main BaseII』 and 『Grip Bar III Set』(*2)】
　--Release date: July 12th, 2007


「Optical D Cable L・Cap W38 Set with Shade Rubber Sheet」(except “Optical D Cable L”)
installed on PT-E03 / E-440


「Holder II Set」


「Holder II・Grip Set」



[ Combination example【dual strobe, 8mm fish-eye】]
・ Olympus 「E-410」 ＋ Olympus 「PT-E03」
・ Olympus 「ZUIKO DIGITAL ED 8mm F3.5 Fisheye」
・「Dome Port Olympus・Protector II Set 」(*3)
・ Olympus 「PPZR-E05」

・「D-2000」x 2
・「-0.5 White Diffuser (External Auto)」x 2

・「Optical D Cable L・Cap W38 Set with Shade Rubber Sheet」
・「Optical D Cable L」
・「Holder II・Grip Set」
・「Arm M Set Z」x 2


[ Combination example【single strobe, 50mm macro】]
・ Olympus 「E-410」 ＋ Olympus 「PT-E03」
・ Olympus 「ZUIKO DIGITAL ED 50mm F2.0 Macro」
・「MRS Olympus 50 Port」(*3)
・「Magnet Ring・Olympus 50 Set」(*3)

・「D-2000」
・「-0.5 White Diffuser (External Auto)」

・「Optical D Cable L・Cap W38 Set with Shade Rubber Sheet」
・「Holder II Set」
・「Arm S Set Z」
・「M67 Lens Holder S」+「UCL-165M67」


「Holder II Set」/「Holder II・Grip Set」 is used as in image below to hold back of right hand for stable housing handling and enables fine and thin control of the shutter release button

Right hand position using 「Holder II Set」 installed on PT-E03 / E-410

Additional INON "Arm II" system and 「Optical D Cable L・Cap W38 Set with Shade Rubber Sheet」 enables to use "S-TTL" auto strobe 「D-2000」 series or 「Z-240」etc.
【“S-TTL”auto】of 「D-2000」series/「Z-240」 gives you correct exposure with an external strobe by simply pressing shutter release button.
Optional “Arm II” and 「Optical D Cable L」 upgrades to dual strobe configuration.

Together with new INON port for Olympus E system (*3), INON offers light weight, reasonable and high operability camera system for high image quality.

(*1)
Contact Olympus Corporation for detail of camera / underwater housing.
INON Inc. confirms product compatibility based on a camera / underwater housing available in Japan.

(*2)
From July 12th, 2007, component product is changed.
(Current set consists of 『Holder II』, 『Main BaseII』 and 『Grip Bar II Set』)
Refer to link of related news below for detail.

(*3)
『Dome Port Olympus』 for Olympus「ZUIKO DIGITAL ED 8mm F3.5 Fisheye」, 『MRS Olympus 50 Port』 for Olympus「ZUIKO DIGITAL ED 50mm F2.0 Macro」 and related product will be released on 『August 7th, 2007』.
Refer to link of related news below for detail.


Related information is available at following link page.

・【News】Renewal / specification change of 『Grip』 related product
http://www.inon.co.jp/cgis/news/En_html/WebNews143_En.htm

・【News】Port for Olympus E series
http://www.inon.co.jp/cgis/news/En_html/WebNews144_En.htm




July 10th, 2007

INON Inc.